0
0 Putting in custom curtain rods can elevate the look of any room, adding a contact of style and personalization. Nevertheless, it’s not so simple as just drilling a number of holes and hanging up your curtains. Small mistakes can lead to crooked rods, curtains that don’t grasp properly, and even damage to your walls. To avoid wasting yourself from frustration and further work, here are 5 widespread mistakes to keep away from when putting in customized curtain rods.
1. Neglecting to Measure Properly
One of the biggest mistakes individuals make is skipping the measurement step or doing it incorrectly. Curtain rods have to be positioned at a precise height and width to make sure the curtains look balanced and functional.
– Why It’s a Problem: If you happen to don’t measure accurately, your curtains could end up being too quick, too long, or not wide enough to cover the window.
– Learn how to Keep away from It: Use a tape measure to determine the height where you need your rod to sit. Typically, rods must be installed 4-6 inches above the window frame for a taller room appearance. Also, extend the rod 3-6 inches beyond the window frame on either side to permit for full curtain coverage and smooth opening.
2. Selecting the Fallacious Hardware
Not all curtain rods and brackets are created equal. Choosing the incorrect hardware can lead to instability or problem in hanging your curtains.
– Why It’s a Problem: Heavy curtains on flimsy rods can cause the rod to sag or even collapse. Equally, utilizing the fallacious type of screws or wall anchors can lead to rods pulling out of the wall over time.
– Learn how to Avoid It: Check the burden of your curtains and choose rods that can assist them. For heavy drapes, opt for sturdy rods with reinforced brackets. For those who’re installing into drywall, use appropriate anchors to make sure a secure hold.
3. Ignoring Wall Materials
Not all partitions are the same, and the type of wall you’re working with determines the installation approach and tools required.
– Why It’s a Problem: Failing to consider wall material can lead to unstable installations. For instance, nails or screws inserted directly into drywall without anchors will likely loosen over time.
– How one can Avoid It: Establish whether or not your wall is drywall, plaster, concrete, or wood. For drywall, always use anchors. For concrete partitions, you’ll need a masonry drill bit and anchors. Tailoring your approach to the wall materials ensures a secure and long-lasting installation.
4. Hanging the Rod Too Low
It’s tempting to install curtain rods just above the window frame, but this mistake can make your room look smaller and the window appear shorter.
– Why It’s a Problem: Curtains that are hung too low can visually cut off the height of your room, making it feel cramped and less inviting.
– The best way to Keep away from It: Always goal to hang the curtain rod higher than the window frame—typically 4-6 inches above, and even closer to the ceiling for a dramatic effect. This trick draws the eye upward and makes your ceilings seem taller.
5. Forgetting to Level the Rod
A crooked curtain rod can ruin the overall aesthetic of your room, no matter how lovely the curtains are.
– Why It’s a Problem: Uneven rods make curtains cling awkwardly, which is noticeable and unattractive.
– How you can Avoid It: Always use a level before drilling or attaching brackets. Mark your measurements on the wall with a pencil and double-check for accuracy. Even a slight tilt can be discoverable, so take your time to make sure perfection.
Bonus Suggestions for a Flawless Curtain Rod Set up:
– Pre-Check Your Curtains: Before putting in the rod, make sure the curtain length and style match your planned rod height and width.
– Use a Template: If installing a number of rods, create a template to ensure uniform placement throughout the house.
– Consider Aesthetic: Match the rod style and finish to your room’s decor for a cohesive look.
Putting in customized curtain rods doesn’t must be a hassle. By avoiding these frequent mistakes and following the guidelines above, you can achieve a cultured, professional-looking result that enhances your space. A little further time spent on preparation and attention to detail will prevent from headaches down the road and give your home windows the proper frame they deserve.
If you enjoyed this post and you would like to receive more info relating to https://ironrods.com/ kindly browse through our own web-page.
